高输出功率小感应电流试验报告检测仪（耐电孤试验报告检测仪）-（估算机操作）

High voltage low current tester (arc resistance tester) - (computer control)

食产品简称称：耐电弧试验机

Product name: electric arc resistance tester

的产品规格型号：NDH-A

Product model: NDH - A

要求规范标准：GB/T 1411-2002《混合物绝缘电阻村料耐高降低工作电流电弧焊接蓄电池放电的实验》（同等IEC  61621-1997）及ASTM D495等标准规定的规定结构设计营造的，并符合要求IEC 149、UL 746A等试验台做法

Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc

一 概述

一An overview of the

大部分适于空间及工作：

本试验报告机是确定软件应适用电机的、物品和家居用物品等业的电工维修用氟塑胶板材、树酯胶和电绝缘层带电阻电阻漆等电绝缘层带电阻电阻材质的耐脉冲效能鉴定，主适用固态物体电绝缘层带电阻电阻材质如：氟塑胶板材、保护膜、树酯、白云母、淘瓷、玻璃板、电绝缘层带电阻电阻油、电绝缘层带电阻电阻漆、厚纸板等媒质的耐脉冲效能测试英文；

本试验台机由确定机管控启动，能能凸显眼下进行测试的状态及进行测试时间间隔，进行测试结束了后并保留眼下进行测试的数据，并可彩打.标淮测试统计。

Main scope of application and features:

This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;

This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report 

二 功能特点

1 机器为前后一体化格局，下面为使用web服务，顶部为测试箱。

2 本產品用*新智力调整科技，进行采用系统（IEC或ASTM）可一键完成检验，并在电子产品上体现 实验的过程和但是。

3 **效果优秀，抗干挠力强，测试测试精确度不高。

二：Functional features：

1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.

2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.

3 good safety performance, strong anti-interference ability, high test precision. 

三 主要技术参数

1 弧光通断日期计算误差：大于 ±10ms

2 调压器存储量：2kVA

3 载荷系数试验台线电压：12.5kV

4 应力测试电阻精确：±3%

5 感应电流保持可靠性强，精密度：±10%  直流电压量测定位精度：1.5%

6 金属电极对试件的压力：（0.5±0.05）N

7 参比电极村料：钨棒

8 电级长度：（6.35±0.1）mm（IEC）

               （6.0±0.1）mm（ASTM）

9 应用自然环境温暖：（23±2）℃

10 施用环镜室内温度：（50±5）%

11 交流电源：220V±5%  50Hz  10A

12 实验    方式：   执行标准/美标/10 mA 不断/20 mA 连继/30 mA重复/40 mA维持

13 冲击试验源程序内容如下：

Three main technical parameters：

Error: 1 arc on-off time less than plus or minus 10 ms

Transformer capacity: 2 kva

3 test voltage rating: 12.5 kV

4: test voltage accuracy + / - 3%

5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%

6 electrode pressure on sample: (0.5 + 0.5) N

7 electrode materials: tungsten rods

8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)

9 using the environment temperature (23 + 2) ℃

10 use environment humidity: (50 + 5) %

Power supply: 220 v + 5% for 50 hz 10 a

Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous

13 test procedure is as follows:

Procedures section of the arc current

MA arc on-off time s the program s test total duration time s

IEC 61621 ASTM D495

1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s

2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s

3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s

4 consecutive 10 to 60, 240

5 20 consecutive 60, 300

30 consecutive 6 to 60, 360

7 consecutive 40 to 60, 420 

四  配置

Four configuration：

Serial number name number note

01 arc resistance tester

02 a electrode system

03 electrode bearing a set

04 a set of power cable

05 ground put a rod

06 milliammeter current one

7 a set of computer measurement and control software

08 specimen holder a

09 electrode distance standard 2 blocks

Standard 2 blocks of 10 Angle

11 ceramic pieces 2 pieces

12 one brand inkjet printer

13 1 computer brand

14 1 instruction manual

15 1 certificate

五 产品设备机型：

NDH-A    耐弧光耐压仪-微机操纵

NDH-B    耐焊弧校正仪-触屏屏把控好

Five product model:

NDH - A arc resistance tester - microcomputer control

NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询！